Hydraulic Bender Model L (90°) for CTCs and Straps

Trust us your perfect 90°

Precision in Bending

The Hydraulic Benders Model L (90°) were designed to bend the CTCs and Straps to 90° without damaging the copper wrapping paper. To gain a clearer understanding, we invite you to watch our engaging video presentation on YouTube.

For now there are 6 types Hydraulic Benders Model L (90°):

L20 is the smallest, it bends copper with the following dimensions: A min 4 mm, A max 15 mm, B min 2 mm, B max 20 mm, R 15 mm. R&D is going on the battery powered version.

L20M (Multiplo) is a unique and exclusive model which guarantee the bending of multiple number of copper straps at the same time without damaging them. It bends copper with the following dimensions: A min 4 mm, A max 15 mm, B min 2 mm, B max 20 mm, R 12.5 mm.

L30 is a bestseller model, it bends copper with the following dimensions: A min 4 mm, A max 30 mm, B min 2 mm, B max 30 mm, R 15 mm. R&D is going on the battery powered version.

L50 is a medium-size model, it bends copper with the following dimensions: A min 5 mm, A max 50 mm, B min 5 mm, B max 25 mm, R 15 mm.

L80 is the biggest model, it bends copper with the following dimensions: A min 25 mm, A max 80 mm, B min 5 mm, B max 30 mm, R 15 mm.

L80V (Variabile) is a unique and exclusive model which guarantee the bending of variable types of copper on the same tool, only by changing the adapters. It bends copper with the following dimensions: A min 10 mm, A max 75 mm, B min 5 mm, B max 30 mm, R 12.5, 20, 30, 45 mm.

Technical Information

Normally we provide our clients with the Pump Combination needed for Bender to start working. The pump should be connected to the compressed air at the factory of the client, at 8 bars, with a consumption of 340 L/Min. After the connection, the Hydraulic Bender is immediately operational. The pedal, which is installed directly on the pump, along with the manometer, is connected to the Bender via a high-pressure hose.

Generally Hydraulic Bender does not need any maintenance. The only one thing that is important – is to check the level of oil. The oil used by the hydraulic pump is ISO 46 hydraulic oil.

As well, we provide our clients with the Balancer. It is needed to make the job of the operator easier. So, operator shouldn’t keep it in hands all the time, because it is not very easy to keep such a tool in hands for long, it’s a bit heavy.

In case of broke of some part, you can always find replacement parts at Tecnica 80.

Flared Base on which the mechanical group for folding is assembled.

Handle for fixing the conductor inside the mechanical bending system.

It is empowered by a pneumohydraulic pump that works on the hydraulic cylinder – EP.

The L hydraulic bender helps the operator on the copper bending, while performing and also protecting his health.

Request more informations

send us en e-mail to:
info@tecnica80.com

or call us on:
+39 06 92703357

Latest news

It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.

25 Aprile festa della Liberazione

/
In tutta Italia il 25 aprile i cittadini scendono in piazza…

CWEIME in Berlin 2024

/
We are glad to announce to all our customers that TECNICA 80…

Expanding Horizons: Tecnica 80 in New York City

/
We are excited to announce the upcoming opening of our new…